inflatable boats manufacturer

Tender boat Jeannine 300

To look the price of J300k, to compare with others

boat thwart fastening


boat thwart is fixed very reliably, its hook is tightly clamped by the inflated tube

intended purpose, navigating conditions for inflatable Jeannine 300
Jeannine 300 - 3 person inflatable has D-disign category (small lakes, rivers and canals, where conditions up to and including wind force 4 and significant wave heights up to and including 0,5 m may be experienced). It is flat-bottom motor tender. Boat intended for calm water. Its behavior becomes worse on waves, as at any flat-bottom boat. Wave slaps on a flat-bottom are felt. It is necessary to reduce speed to displacement mode of cruising to decrease discomfort from jolting. Inflatable boat will be optimal choice as the tender providing communication with coast and procedure of come to anchor or unanchor. This flat-bottom boat is good for for trolling.

Boat safety
The boat has continuous rigid flooring. It is possible to stand, to move in boat, to be sat down by all to together on one board. It is unfeasible to capsize this boat by the motions of the crew. 3 independent sections of pneumatic balloon - guarantee of boat unsinkability. If one of the sections is damaged, inflatable boat with the load and passengers will remain afloat, it will not capsize. Supporting the damaged compartment so that water was not filled in in a cockpit, it is possible to reach coast a low speed on the motor, or rowing up oars. Obligatory element of safety - durable safety rope (lifeline) is along the sides for grasp and emergencies.

Assembly and disassembly of boat
The inflatable boat Jannin 300 is longer, but it is cheaper and it is easier than the boat Jannin 280m. However, it requires installation of floorboards. This is not difficult for the not very lazy people: assembling and inflation of boat occupies not more than 10-15 minutes. 4 boat’s floorboards can be assembled or dismantled without any efforts. The connections is of "male-female" type, metal inserted into the metal: duralumin profile is fixed on the ends of the sections of flooring. Continuous flooring ensures sufficient hardness to boat, and it means, the bestspeed characteristics of this boat.

This inflatable boat equipped with an eight horsepower outboard with one passenger onboard can reach maximum speeds of 35 km per hour on smooth water.

10 horsepower outboard will easy plane out this inflatable boat with two adult passengers and their gear. With three passengers - in no way.

If you choose 5h.p. outboard to this inflatable boat, the cruising will be in water-displacing mode. The expected speed of motion - 10-18 kilometres per hour, depending on load. But for the amateurs of trolling fishing - the thing. Novices of boating prefer for the beginning to take just small motor. After the acquiring of the experience in boating there is no problem to sell it and to purchase more powerful outboard.

Design features of the boat
The inflatable boat of Jannin-300 has what it takes according to requirements of standards to a recreational craft, and even some more:

• drain plug system,
• outboard plate, engine pad
• oar retainers,
• towing and mooring rings,
• wide rubbing strake
• lifting handle for carrying of boat, easy to grasp,
• oarlocks,
• directing for anchor or mooring line on a bow of a tender, which protects a inflatable tube from abrasion by the rope,
• 4 rings for hanging of bow storage bag
• lifting D-ring patch are option

The weight is distributed on 2 packings 26+24 kg.

2 seats and 4 floor sections of motor boat are made from the water-resistant laminated plywood. Florboards and thwatrs are packed in a separate bag that prevents boat skin abrasion damage against rigid part at packing and transportation.

Thwarts are fixed enough highly that the pose for sitting is convenient. The back will get tired less at lasting many hours stay on swell wave.

Tender unsinkability is provided by splitting of a inflatable buoyancy tube into 3 independent sections. The boat has good stability thanks to width and increased diameter tube. As befits, the safety rope is around buoyancy tube of the tender.

The tender is convenient for carring both three together, or together. There are 3 firm handles on tube (one on a bow and two on stern, at the transom). If to do carring together, one person must be at a bow, another grasps at apertures in transom.

• Inflatable dinghies & inflatable tenders (length from 1,95m to 3,3m)
  inflatable-boats-en-e4.pdf  304K - Open
• Inflatable sportboats & versatiles, RIBs (length from 3m to 5m)
  inflatable-boats-en-e6.pdf 278K - Open